|
Handheld T1/E1 Troubleshooting Tool
TAU 2 provides the test access capability of
a cross-connect panel (DSX), in a small,
convenient, handheld package. It provides
a complete set of MONITOR, IN and OUT bantam
jacks for both circuit directions from the test
point. In addition, TAU 2 provides simple
switches to loop-back the circuit in either
direction. View the
datasheet (PDF).
|
|
Introducing the Vision IP |
|
Electrodata’s new Vision IP is a
handheld test instrument for complete
troubleshooting of Ethernet networks.
VisionIP tests both wireline and
wireless Ethernet including the latest
wireless 802.11n and Power over Ethernet
Plus(PoE+) 802.3at standards. Rugged
construction and a bright, clear LCD
touchscreen make control and operation
an enjoyable process wherever a failure
takes you.
Use Vision IP to verify operation and
proper functionality of your network
elements including your wireless APs and
even your cables and cable connections.
With VisionIP, one button press quickly
displays pertinent information to
efficiently resolve node failures. Plus,
an Autotest feature for both wired and
wireless connections makes it easy to
identify and solve intermittent network
issues. Simple controls and
sophisticated test solutions mean Vision
IP will enable you to troubleshoot your
network problems quickly and with ease.
Download the complete specifications ( PDF).
|
 |
|
|
|
COMM-WATCH II is a comprehensive
remote monitor and alarm instrument
for telecommunications
T1, E1 or J1 circuits.
COMM-WATCH II
monitors both the receive (NETWORK) and
transmit (SITE) sides of the circuit. It
reports failures or alarm conditions and
performance measurements of remote network
sites.
COMM-WATCH II also provides channel related
information for PRI and conventional
signaling as well as an extensive capture
capability. The user is able to determine
whether the failure is network generated or
caused by on-site equipment at the remote
location
Watch this
Short Video presentation
or download the complete
specifications (PDF).
T1-LITETM
T1 Transmission Test Set
TRANSMISSION TESTING AT A
FRACTION OF THE COST
Electrodata's T1-LITETM
provides all the basic T1
testing functions in a small
package and at a great price.
The T1-LITE is designed with
full T1 transmit and receive
functions perfect for turning up
and troubleshooting T1 lines and
equipment. Built to the same
exacting standards of other
Electrodata products, the
T1-LITE is designed to
autoconfigure to the line
coding, framing format, and test
pattern; perform bit error
testing using standard T1 test
patterns; identify error and
alarm conditions; measure signal
frequency and level; display 24
channel signaling; perform drop
and insert operations; provide
CSU / NIU loopback emulation;
and includes a timing reference
jack to allow clock slip
detection and measurement. The
T1-LITE is designed to test
across the full T1 band or test
individual 64K channels.
|
|
EASY TO USE
The T1-LITE uses thirteen LEDs to
display normal line operation, alarm or
error conditions, and test set battery
condition. A twelve button keypad allows
auto-configuration, test set up, DS0
channel selection, line loop ups and
loop downs, error injection, and results
monitoring with the touch of a finger. A
built-in speaker allows channel
monitoring, and a headset jack allows
monitoring and voice operation with any
standard "cell phone" type headset. The
easy to read 2-line by 16-character
liquid crystal display makes set up and
results reading simple.
The Complete Package
The basic instrument T1-LITE comes
complete with a PS-3 battery eliminator
/ charger and technical manual, or can
be purchased as a kit that includes the
T1-LITE, PS-3, technical manual, padded
carrying case, headset, two
Bantam-to-Bantam test cables with 310
adapters, and a dual Bantam-to-RJ48 test
cable. The T1-LITE is covered by a
standard three-year warranty.
|
|
Combined DS3 and Dual Line DS1
Tester
|
Electrodata's TTS 3,EZ-TESTER®
HD represents the most versitile T1
and DS3 transmission test set
available. Equipped with the best
features and rugged design of the
EZ-TESTER Series, the EZ-TESTER HD
provides testing support for DS0,
T1, and DS3 in a single hand-held
test set. The EZ-TESTER HD is
available in three basic
configurations: DS3 only; DS3 and
Single Line DS1; and DS3 and Dual
Line DS1.
Read the complete specifications
(HTML).
|
|
|
|
